Product name

φ60mm-24HC

没有此类产品
I want to make an inquiry
Introduction

Economical features

 

● Short delivery schedule flexibility

●High consistency of production and reliability

 

*1.2/°Step/3Phase

 

 

 Product model definition (example)

 

twenty four

 

04

 

HC

 

45

-

2

-

□□□


 


 


 


 


 


 

 

 

 

 

cabin seat no

 

Length code

 

Economic type

 

Rated current

 

Double shaft

 

Non-standard code

 

     

 

 

 

 

60mm

 

     

 

4.5A

 

(single axis is omitted)

 

 

 

 Electrical parameters (delivery ≤ 15 days)

 

model

driver

Holding torque

Current

resistance

inductance

Rotational inertia

Body length L

weight

Single axis

Double axis

Adaptation model

N•m

A/phase

Ω/phase

mH/phase

g.㎝²

mm(MAX)

Kg

2401HC45D8

2401HC45D8-2

CSD758R

1.00

4.5

0.5

0.8

280

56

0.58

2402HC45D8

2402HC45D8-2

CSD758R

1.25

4.5

0.7

1.2

380

64.5

0.85

2403HC45D8

2403HC45D8-2

CSD758R

1.50

4.5

0.8

1.5

440

76

1.15

2404HC45D8

2404HC45D8-2

CSD758R

1.75

4.5

1.0

2.5

580

90

1.41

 

*note:

●The above representative products, Handebao motor product team can be customized according to customer requirements:

winding parameters   lead method and lead length  output shaft   shaft diameter and length   other body length  with precision planetary reducer 

●The above drive models are only recommended products, and other economical, network, switch-controlled and other drive products are available.

Please contact our sales staff for the delivery of the above products. The delivery of bulk demand will take more than 15 days.

 

 General specifications

 

project

parameter

Remarks

Precision step angle

1.2°/Step

Can be customized according to customer requirements 0.9 °, 3 °, 3.6 ° step angle.

Step angle accuracy

±0.06° (no-load full step)

Can be customized according to customer requirements 0.045 °, 0.15 °, 0.18 ° step angle.

Protection level

IP43

IP54 or IP65 can be customized according to customer requirements.

Inductance accuracy

±20%

Smaller tolerances are available upon customer agreement.

Resistance accuracy

±10%

Allow temperature rise

<80 ° C (rated current, two-phase energization)

Higher requirements can be ordered.

Ambient temperature

-20°C~+50°C (no icing)

environment humidity

85% or less (no condensation)

Media environment

No corrosive gas dust, no direct contact with water, oil, etc.

Insulation level

Class B (+130 ° C)

Insulation withstand voltage

AC1000V50/60Hz one minute

Insulation resistance

DC 500V measured in megohmmeter above 100Ω

 

 Wiring diagram

 

 

*note:

When DC excitation is performed in the order, the rotation direction is clockwise rotation as viewed from the output side.

A+ A-Intermodulation driver interface, the direction of rotation is counterclockwise as viewed from the output side.

● For wiring color, please refer to the motor wiring diagram for connection.

 

 Excitation order VS rotation direction

 

 

 

*Note (take two-phase power as an example):

Look at the mounting end of the motor.

According to the excitation sequence specified in the table.

● The motor will rotate in a clockwise direction.

 

 Allow radial load

Allow suspension load (distance from the end of the shaft)

Allow axial load

0mm

5mm

10mm

15mm

20N

61N

73N

90N

110N

Radial clearance

0.075mm Max. (When a 1N axial load is applied to the shaft end of the shaft)

Axial clearance

0.025mm Max. (When a 5N vertical load is applied to the shaft end of the shaft)

Axis and boss concentricity

0.075TIR (mm) measured the maximum with one rotation of the axis as the center point

Axis perpendicular to the mounting surface

0.025 (mm) TIR measured the maximum with one rotation of the axis as the center point

 

 Installation method

 

*note:

Please consider the heat dissipation and vibration prevention as much as possible to fix the motor firmly on the tough metal surface.

Be sure to use the mounting boss of the motor front cover to position it, and pay attention to tolerances, and strictly ensure the concentricity of the motor output shaft and load.

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Page Copyright © Kunshan Yuepuda Automation Technology Co., Ltd 丨 COPYRUGHT-2018 ALL RIGHTS RESERVED
苏ICP备16019572号-1
Powered by www.300.cn